Interesting... Well I gotta say nice post, very nice
| Psypoke http://forums.psypokes.com/forums/ |
|
| Spriting http://forums.psypokes.com/forums/viewtopic.php?f=21&t=3988 |
Page 1 of 1 |
| Author: | bobashotmace [ Mon Jul 25, 2005 11:34 am ] |
| Post subject: | Spriting |
Okay, for sprites on Photoshop go to Spriting 101 at Team Rockets Rockin, for sprites on paint, read this. The words have changed, but the steps have not. These are the instructions I gave Kryten and someone else whos name I cannot remember. <img src="http://img.photobucket.com/albums/v495/bobashotmace/Steps.bmp" alt="Image hosted by Photobucket.com"> 1. Find 2 sprites, for this demonstration I will be using an FRLG butterfree and mew. You may want to do this along with me. 2. Pick whatever part of sprite X you want to put on Sprite Y, for this demonstration I will be putting Mews tail on Butterfree. 2. (b) Ignore this step for sprite where you can rip the whole peice off in one move, if you cannot, like with the tail, rip it off in the biggest peices you can, careful not to move any of the main sprite. 3. Ignore if you ripped it off all at once. If you had to take it in peices, then put it back together like a puzzle. 4. drag Sprite Y onto piece X, or piece X onto Sprite Y in some cases 5. Recolor piece X to match Sprite Y, doing the lightest color on sprite Y with the lightest on peice X and continuing in that manner till the end. 6. Hey, your done, plus, if you did this, now you have a nifty tailess mew! |
|
| Author: | Magus [ Mon Jul 25, 2005 11:42 am ] |
| Post subject: | |
Interesting... Well I gotta say nice post, very nice
|
|
| Author: | bobashotmace [ Mon Jul 25, 2005 11:49 am ] |
| Post subject: | |
tnx Soon I might psypoke BG colorize it! |
|
| Author: | Magus [ Mon Jul 25, 2005 11:52 am ] |
| Post subject: | |
If you want I could make it transperant so that if you decide to post this in the E4 it won't have to be psypoke colored. |
|
| Author: | bobashotmace [ Mon Jul 25, 2005 11:57 am ] |
| Post subject: | |
oooooooh, yes please. |
|
| Author: | Magus [ Mon Jul 25, 2005 12:06 pm ] |
| Post subject: | |
okay, I'll PM it to you when I'm done. |
|
| Author: | bobashotmace [ Mon Jul 25, 2005 12:14 pm ] |
| Post subject: | |
well, what about the E4 color, the backgrounds black... |
|
| Author: | Magus [ Mon Jul 25, 2005 12:34 pm ] |
| Post subject: | |
got it covered, I looked at the E4 before I started and but in new text, it's in white so it'll be fine for here and the E4. Also I cleaned up the sprites so the sheet isn't as messy. Heck why waste time here it is: 
|
|
| Author: | Kryten [ Mon Jul 25, 2005 12:58 pm ] |
| Post subject: | |
How do you make transparency? Please tell me ShadowFlygon |
|
| Author: | bobashotmace [ Mon Jul 25, 2005 2:01 pm ] |
| Post subject: | |
thnx so much Shadow, that might go on the site as well. |
|
| Author: | Magus [ Mon Jul 25, 2005 6:06 pm ] |
| Post subject: | |
Your welcome bobashotmace and to make transperancey kryten you need a program with it, photoshop is the only one I know.
|
|
| Author: | tessa7338 [ Mon Jul 25, 2005 8:11 pm ] |
| Post subject: | |
You know you COULD make transparency for those unfortunate souls who don't have Photoshop. (Like me, my stuff badly needs a transparency maker) You could run your own transparency service even. |
|
| Author: | darkmagician2523 [ Mon Jul 25, 2005 8:16 pm ] |
| Post subject: | |
ShadowFlygon wrote: Your welcome bobashotmace and to make transperancey kryten you need a program with it, photoshop is the only one I know.acually,photo impression 4 has it too,thankfully i can have transparency now :roll: (just got it) |
|
| Author: | Magus [ Mon Jul 25, 2005 8:26 pm ] |
| Post subject: | |
tessa7338 wrote: You know you COULD make transparency for those unfortunate souls who don't have Photoshop. (Like me, my stuff badly needs a transparency maker) You could run your own transparency service even. darkmagician2523 wrote: acually,photo impression 4 has it too,thankfully i can have transparency now :roll: (just got it) Well now I know two programs that have transperancey. |
|
| Author: | rubypoke [ Tue Jul 26, 2005 5:41 am ] |
| Post subject: | |
MS paint can do a bit of transparency. Just like select the image you want to be transparent, then click Image then click Draw Opaque then it either goes Opaque or Transparent depending if uve used it before on the same item. |
|
| Author: | AbsolNightmare [ Tue Jul 26, 2005 3:15 pm ] |
| Post subject: | |
[quote="bobashotmace"] These are the instructions I gave Kryten and someone else whos name I cannot remember. quote] that would be me that you instructed  . finally ive figured out how to make it recolored! thanx for your instructions, they've really helped me!
|
|
| Author: | bobashotmace [ Tue Jul 26, 2005 5:30 pm ] |
| Post subject: | |
your welcome everybody! Glad to see I've done sometin good. PS About the draw opaque, that ain't really transparency at all, and heres a better way then going on the menus! When you select the selct tool, look below the tools, ther'll be 2 yellow boxes, the one its selected on is one thing, if you say draw opaque it'll change to the other, or you can just click on the other, if you don't get me I'll post a screenshot. |
|
| Author: | rubypoke [ Wed Jul 27, 2005 12:45 am ] |
| Post subject: | |
bobashotmace wrote: your welcome everybody! Glad to see I've done sometin good.
PS About the draw opaque, that ain't really transparency at all, and heres a better way then going on the menus! When you select the selct tool, look below the tools, ther'll be 2 yellow boxes, the one its selected on is one thing, if you say draw opaque it'll change to the other, or you can just click on the other, if you don't get me I'll post a screenshot. I get what you mean, the two boxes at the bottom that change for every tool. Thanks |
|
| Author: | Flarey [ Sun Jul 31, 2005 3:31 am ] |
| Post subject: | |
But that doesn't save it as transparent! I can make stuff transparent, but when i save it, it changes to non. I'm using PhotoStudio 5. How can i keep it transparent? |
|
| Author: | rubypoke [ Sun Jul 31, 2005 4:46 am ] |
| Post subject: | |
Confused Flareon wrote: But that doesn't save it as transparent! I can make stuff transparent, but when i save it, it changes to non. I'm using PhotoStudio 5. How can i keep it transparent? I havent a clue. Woohoo thanks to bobashotmace ive made sprites! <img src="http://tinypic.com/9qjmgn.jpg" alt="Image hosted by TinyPic.com"> Thanks
|
|
| Author: | Flarey [ Sun Jul 31, 2005 6:55 am ] |
| Post subject: | |
Im gonna try saving it as a different type |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|